Cleaning And Replacing The Exhaust Filter - Hoover QHB10 Quickstick Manual

Maintenance
IMPORTANT! Always remove the battery from the appliance before preforming any
maintenance on the roller brush.
10.

Cleaning and Replacing the Exhaust Filter

1. The Exhaust Filter is installed behind the Exhaust Grille.
Press the Filter Release button to remove the Exhaust Grille.
The Exhaust Filter can now be removed and cleaned using
lukewarm water.
The filter needs to be air dried for 24 hours before it can be
reinstalled into the machine. Alternatively, the filter can be
replaced with a new filter.
Note: It is recommended to replace the filter every 6 months
or when it becomes visibly dirty.
Cleaning or Replacing the Roller Brush
1. Disconnect the powerhead from the rod.
2. To release the roller brush from the powerhead, press the Roller
Brush Quick Release button with one hand and lift the roller
brush from the powerhead with the other hand.
3. If a build-up of debris is wound around the roller brush, remove
by carefully cutting with a scissors. Avoid damaging or cutting
the bristles.
4. To reinsert the roller brush, firstly insert the right side of the
roller brush, as shown, then gently insert the left side into the
powerhead.