Toshiba Satellite L830 Maintenance Manual page 175

Replacement Procedures
Install the Base Assembly
The following describes the procedure for installing the base assembly.
1. Turn the computer upside down.
2. Put the base assembly on the top assembly, press all hook on four sides.
3. Secure the base assembly with the following screw(See Figure 4-8-2 ~ Figure 4-8-3)
Satellite L830 Maintenance Manual (960-Q08)
• M2.0×6.0-I (BNI)(NYLOK) Screw
• M2.0×2.0-I-NI(NYLOK) Steel Screw
x14
x4
27