Data Storage - ResMed AirCurve 10 ST-A Clinical Manual

To remove the SD card:
1. Open the SD card cover.
2. Push in the SD card to release it. Remove the SD card from the device.
Do not remove the SD card from the device when the SD light is flashing.
To insert the SD card:
1. Open the SD card cover.
2. Push the SD card into the device until it clicks.
The following message is briefly displayed: Preparing SD card, do not remove power or your
card.

Data storage

The AirCurve 10 device stores summary data such as AHI, Total Hours Used and Leak. Detailed data
such as snore and pulse rate are stored on the SD card and can be viewed with AirView and
ResScan. High resolution flow and pressure data are stored on the SD card.
Data can be transmitted to therapy management software either remotely via cellular
communication, or via SD card. The different ways of transmitting data are detailed in the table
below.
For more information on therapy management with AirView or ResScan, refer to the manuals
supplied with the software.
Type of data
Summary data (compliance data)
Detailed data
High resolution flow and pressure data
(25 Hz - every 40 ms)
Alarm log
Transmission method
Cellular SD card to
communication ResScan
to AirView


SD Card to
AirView
(card-to-
cloud)
 
 


Sessions stored
365
Limited by usage and
SD card storage
capacity
English 39