Siemens SINUMERIK 828D Manual page 23
Output of setpoints to analog drives - retrofit solution
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
3 Commissioning
Note
The absolute values of the velocity setpoint and velocity actual value are not
relevant. Sensible values in the drive are displayed due to the commissioning
files.
Fig. 3-17 Linear axis SINAMICS parameters
The unit [m/min] is also used for rotary axes. 1 m/min corresponds to 100 rpm.
Example: 1 m/min corresponds to 100 revolutions per minute
Fig. 3-18 Service drive linear axis
Sollwertausgabe an analoge Antriebe
Entry ID: 109761423,
V1.0,
10/2018
Sollwert
10 m/min
Istwert
10 m/min
Sollwert
10 m/min
Istwert
10 m/min
23
- Quick Links:
- Schematic Diagram
Hide quick links:
Advertisement
Table of Contents
