Epson DFX-8000 Service Manual page 211

Reset tie SETA value by pressing the MICRO FEED(V) button
while pressing the TEAR OFF button.
between the print head and the olaten.
Press the MICRO FEED (A) button while pressing the TEAR OFF button. (Do not forget how
many times you press the MICRO FEED(A) button (X times). )
Reset the BETA value by pressing the MICRO FEED (v) button
Press the MICRO FEED (A) button (X-l) times while pressing the TEAR OFF button
to m(Ne the print head to the posltlon one step away from the position where the
print head and the thickness gauge contact
Pull the thickness gauge straight to the right with the exclusive tension gauge (XF545).
Read the tenslon value (the scale on the tenslon gauge) when me thickness gauge begins to move.
The cm
Figure 410. Mechanism Ad$dment Value Measurement
START
I
I
I
(Refer to Figure s-11.)
I
I
The previous value is closer to 150 gf.
Adjustment
Press the MICRO FEED (A) button.
4 - 1 7