Table of Contents
Advertisement
700-701-100-02
Table 24
describes the fields displayed on the Main console screen.
Field
G.703
n TS
Timing
EXT
G.703
Application mode
MAR1
MAR2
ES1
ES2
The Alarms field displays a list of all active alarms at each LTU/NTU and HDSL interface.
Loss of Signal (LOS)
Loss of Frame Alignment (LFA) Loss of frame alignment at the G.703 input.
Receive Alarm Indication
Signal (AIS)
Remote Alarm Indication
Signal (RAI)
Loss of Clock (LOC)
Margin (MAR)
Errored Seconds (ES)
Loss of Sync Word (LOSW)
UTU-701 and ETU-751 List 1
Table 24. Fields Displayed in Main Console Screen
Description
Circuit Configuration
Indicates the interface standard for G.703 data port.
Indicates the number of time slots (n) mapped to the G.703 interface.
Indicates the primary source the unit uses for clock synchronization:
External 2.048 MHz clock.
G.703 port receive clock.
Indicates that the Single Pair (SINGLE) application mode is in effect.
Performance
Displays the Margin value for each HDSL interface or displays link status (SIG, ACQ, etc.) if the link
is not up.
Reserved
Displays the Errored Seconds (ES) counts for each HDSL interface. The counts are for the latest
24-hour period, calculated as the sum of the counts in the previous 95 15-minute intervals, plus
the count in the current 15-minute interval.
Reserved
Alarms
Possible LTU/NTU Interface Alarms
Loss of signal at the G.703 input.
Alarm indication signal (unframed all ones) received at the G.703 input.
Remote alarm indication signal received at the G.703 input (through A-bit).
Applies to loss of external clock when EXT timing is used. The external clock was lost for the
previous second. This alarm is reset when the clock is active again.
Possible HDSL alarms
Margin has fallen below threshold set for the HDSL interface.
Errored seconds count has exceeded threshold set for the HDSL interface.
Loss of sync word at the HDSL interface. Remains active during restart, but not a cold start.
August 9, 2002
Viewing Status
47
Advertisement
Table of Contents
