Specifications; Stihl Fsa 56 Trimmer; Stihl Ak Battery; Charger Stihl Al 101 - Stihl FSA 56 Instruction Manual

Hide thumbs Also See for FSA 56:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 32

19 Specifications

19 Specifications

19.1 STIHL FSA 56 Trimmer

– Approved battery: STIHL AK
– Weight without battery, cutting attachment and deflector:
2.1 kg
– Length without cutting attachment: 1470 mm up to
1670 mm
For battery life see www.stihl.com/battery-life.

19.2 STIHL AK Battery

– Battery technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation and storage:
-10°C to +50°C

19.3 Charger STIHL AL 101

– Rated voltage: see rating plate
– Frequency: see rating plate
– Rated power: see rating plate
– Charging current: see rating plate
– Permissible temperature range for use and storage:
+ 5 °C to + 40 °C
The charging times are indicated at
www.stihl.com/charging-times.
0458-713-9821-D

19.4 Extension Cords

If an extension cord is used, the cross sectional area of its
conductors must meet the following minimum requirements
– depending on the line voltage and length of the extension
cord:
220 V to 240 V
– Cord length up to 20 m: AWG 15 / 1.5 mm²
– Cord length 20 m up to 50 m: AWG 13 / 2.5 mm²
100 V to 127 V
– Cord length up to 10 m: AWG 14 / 2.0 mm²
– Cord length 10 m up to 30 m: AWG 12 / 3.5 mm²

19.5 Noise and Vibration Data

K-value for sound pressure level is 2 dB(A). K-value for
sound power level is 2 dB(A). K-value for vibration level is
2 m/s².
STIHL recommends that you wear hearing protection.
– Sound pressure level L
pA
EN 50636-2-91: 72 dB(A)
– Sound power level L
measured according to EN 50636-
wA
2-91: 86 dB(A)
– Vibration measurement a
EN 50636-2-91; control handle and loop handle: 3.5 m/s²
The vibration values quoted above have been measured
according to a standardized test procedure and may be used
to compare electric power tools. Depending on the type of
usage, the vibrations that actually occur may differ from the
values quoted. The vibration values quoted may be used for
an initial assessment of the user's exposure to vibrations.
The actual exposure to vibrations has to be estimated. This
process may also take into account times during which the
electric power tool is switched off and times during which it
is switched on but running off load.
Information on compliance with Vibration Directive
2002/44/EC is available at www.stihl.com/vib.
English
measured according to
measured according to
hv
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents