Structure and function of the machine
3.8
Pressure adjustment for clincher back pressure
- Fig. 3.8 -
The clincher back pressure can be adjusted, it depends on the stitching thickness and the kind of
paper.
- First loosen clamp levers -1- on the right and left side of the machine.
- then loosen the clamp lever -2- and adjust the clincher back pressure with the adjusting lever -3-.
- After the pressure adjustment tighten again clamp lever -2- and both clamp levers -1-.
26
ORION 4
10/2010
Hohner Maschinenbau GmbH