Examples Spcn Connections - IBM e Server i Series Setting Up

__ d. Connect another cable to connector J16 on your first expansion unit.
__ e. Connect the other end of the cable to connector J15 on your next expansion unit.
__ f. Repeat the above steps until all expansion units are connected.
__ g. Connect the power cable. Do not plug into the wall outlet.
__ 3. Close or replace the back cover if you have one.
__ 4. If you are installing a new server with this expansion unit, return to the Cabling instructions.
__ 5. Continue with Chapter 3, "Complete your installation," on page 19.

Examples SPCN Connections

The following diagrams are examples that show SPCN connections:
16
Setting up your 0588, 0595, 5088, 5094, 5095 or 5294 Expansion Unit V5R3