Philips 7825XL User Manual page 7

8 ENGLISH
1 Always turn razor OFF, remove the
charging plug from outlet and remove cord
from razor before cleaning.
C
2 Press the Razor Head Release Button, flip
open the Razor Head Assembly.
C
3 Clean razor heads and hair chamber by
running under hot water.
4 Close the Razor Head Assembly and shake
off excess water.
C
5 Open Razor Head Assembly again and
leave open to air dry.
6 You may also clean the hair chamber
without water by using the supplied brush.
Once A Month: Razor Heads
◗ Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn razor OFF, remove the charging plug
from the outlet and cord from the razor.
C
2 Press the Razor Head Release Button and
open the Razor Head Assembly.
C
3 Turn the wheel counterclockwise and
remove the retaining frame.
\
4 Remove and clean one set of heads at a
time.
C
5 Separate the cutter from the comb and
rinse clean under hot water.
◗ Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally interchange the cutters and combs,
it could take several weeks before optimal
shaving performance is restored.
C
6 Replace the set back into the Head
Assembly in such a way that the sides with
the little holes point to the middle of the
shaving unit.
◗ Make sure that the two pointy edges of the
head fit exactly into the recesses.
7
Repeat the process for the other two sets
of cutters and combs.
8 Replace the frame.
C
9 Press down and turn wheel clockwise until
it locks into place.
10 Replace the Razor Head Assembly back on
razor.
◗ If the razor heads have been properly inserted,
a shiny circle is visible in the middle of the razor
head assembly.
ENGLISH 9