Restart/Reset] Tab - Furuno SC-33 Operator's Manual

2.9

[Restart/Reset] Tab

You can restart the SATELLITE COMPASS
start/Reset] tab.
Note: If the hdcom (Sp) sentence is turned on at the [SentenceList] dialog box (see section 2.5),
the hdcom (Sp) sentence is turned off automatically to restart the SATELLITE COMPASS
store factory default settings.
Item
Restart Antenna Unit
Restart
Reset Menu Settings
Reset
Factory Reset
™
and restore factory default settings from the [Re-
Click the [Restart] button to restart the anten-
na unit. The message shown to the right ap-
pears. Click the [Yes] button to restart the
SATELLITE COMPASS
grayed out during the restarting.
Click the [Reset] button to reset user settings.
The message shown to the right appears.
Click the [Yes] button to clear all user settings.
All buttons are grayed out while restoring the
factory default settings.
Click the [Reset] button to restore factory de-
fault settings. The message shown to the right
appears. Click the [Yes] button to restore all
default settings. All buttons are grayed out
while restoring the factory default settings.
20
2. HOW TO SETUP THE MENU
Remarks
™
. All buttons are
™
or re-
Yes(Y) No(N)
Yes(Y) No(N)
Yes(Y) No(N)