How To Close The Sc Setting Tool; How To Uninstall The Sc Setting Tool - Furuno SC-33 Operator's Manual

1.4.2

How to close the SC setting tool

1. If the settings are not applied to the SATELLITE COMPASS
button on the [SC_Setting_Tool] dialog box to apply the settings.
2. Select [File] from the menu bar, then select [Exit] to close the SC setting tool.
You can also close the SC setting tool by clicking the close button (
the dialog box.
1.5

How to Uninstall the SC Setting Tool

Do as follows to uninstall the SC setting tool:
Note 1: Login as administrator to uninstall the SC setting tool.
Note 2: The following uninstalling procedure uses the executable file of the SC setting tool. You
can uninstall the SC setting tool from the control panel of the Windows
1. Run the executable file of the SC setting tool (file name: SC_Setting _Tool_Installer.msi).
The following setup wizard appears.
2. Click the [Remove SC_Setting_Tool] radio button.
3. Click the [Finish] button to start the software uninstallation.
The progress bar is shown while uninstalling the SC setting tool. After completing the unin-
stallation, the confirmation message appears.
4. Click the [Close] button to close the setup wizard.
The shortcut icon for the SC setting tool is removed automatically after the uninstallation.
1. OPERATIONAL OVERVIEW
™
, click the [Apply] or [Apply All]
8
) at the upper right of
®
.