Advertisement
flashing. Set the required cooking time
using the +/- buttons (up to 99 hours).
∙ Press the
button again to set the
minutes (up to 59).
∙ Start the cooking process by pressing
the
button.
∙ The indicator light shows blue and
the display gives the current water
temperature.
∙ Once the pre-set temperature is
reached, 2 beep signals are heard,
and the indicator light starts flashing
blue. From now on, the pre-set time
starts running, with the time remaining
showing in the display.
∙ Once the programmed cooking time has
elapsed, 3 beep signals are heard, the
indicator light turns red and the display
shows 'END'. The bags can now be
removed and used or stored.
∙ To interrupt cooking, to re-
programme or to switch the appliance
off, press the On/Off button
more than 2 seconds.
∙ Always remove the plug from the wall
socket after use; allow sufficient time
for the appliance to cool down before
pouring out the water and starting the
cleaning process.
∙ HINT:
During cooking, you may notice small
eddies in the water. This is harmless,
but may be stopped by briefly
inserting a wooden spoon.
18
for
Advertisement
