Siemens NCU 7x0.3 PN Series Manual page 83

Type plate
The NX module type plate contains the following basic information:
Figure 9-2
Note
You might need to access the information provided on the side-mounted type plate after the
equipment has been mounted. Since the type plate is located on the right-hand side of the
housing, which is the side typically used to connect to the SINAMICS S120 module, we
recommend that you make a note of the serial number of the NX prior to assembly.
NCU 7x0.3 PN
Manual, 09/2011, 6FC5397-1EP40-0BA0
Type plate using the NX10.3 as example
Connectable components
9.1 NX10.3 / NX15.3
83