Siemens NCU 7x0.3 PN Series Manual page 153

Type plate
NOTICE
You might need to access the information provided on the type plate after mounting. Since
the type plate after mounting the option board can no longer be read, we recommend that
you at least note down the serial number before mounting.
The following diagram shows you all of the information provided on the type plate.
Serial number
Order number
Module designation
Figure 9-24
This plate is only visible, when the option board has been removed; it is attached to the
underside of the option board.
Note
The contents of the individual type plate fields on the actual option board may differ from
those described in this manual (e.g. updated product status, approvals and markings not yet
issued, etc.).
NCU 7x0.3 PN
Manual, 09/2011, 6FC5397-1EP40-0BA0
CBE30-2 type plate
HW version
Connectable components
9.5 CBE30-2
153