3.2
Default Settings for the Main Board Switches
The switches (except for the Rotary Switches SW12 and SW13) on the main board are SPDT slide
switches with two possible settings: DOT and NO DOT.
•
DOT indicates the position in which a dot is visible.
•
NO DOT indicates the position in which a dot is not visible.
Table 4
shows the default factory settings for the switches on the main board.
Figure 3
shows the switch locations. Please verify that all switches are set to their factory defaults.
®
Table 4.
Intel
PXA27x Processor Developer's Kit Main Board Default Switch Settings
Switch ID
SW1
SW2
SW3
SW4
SW5
SW6
SW7
SW8
SW09
SW10
SW11
12
Default Settings
DOT
DOT
DOT
DOT
DOT
DOT
DOT
DOT
DOT
DOT
DOT
®
Intel
PXA27x Processor Developer's Kit - Quick Start Guide
Switch ID
Rotary SW12
Rotary SW13
SW14
SW15
SW16
SW17
SW18
SW19
SW20
SW21
Default Settings
A
D
NO DOT
NO DOT
NO DOT
DOT
DOT
DOT
DOT
DOT