Using The Radio; Using In Pc Monitor Mode - Philips 15HF5234/10 User Manual

Using the radio

Choosing radio mode
& Press the
key on the remote control to
AV
display the
Source List
é Use the cursor </> key to select
and then press the cursor ≥ key to switch the
TV to radio mode.
To return to TV mode, press the AV key, select
TV and validate with ≥key.
In radio mode the number and name of the
station (if available), its frequency and the sound
mode are indicated on the screen.
Selecting programmes
Use the / or
0 9 P -/+
stations (from 1 to 40).
List of radio stations
Press the ı key to display / hide the list of
radio stations.Then use the cursor to select a

Using in PC monitor mode

NOTE
– When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is
operated under electromagnetic interference environment but will not affect the performance of this product.
– For better performance, good quality DVI cable with good noise isolation filter is recommended.
PC Mode
Your TV can be used as a computer monitor.
You must first of all connect the computer and
adjust the resolution (see p.13).
Choosing PC mode
& Press the
key on the remote control to
AV
display the
Source List
é Use the cursor </> key to select
then press the cursor ≥ key to switch the TV
to PC mode (
DVI-I In
To return to TV mode, press the
and validate with ≥ key.
TV
Using the PC menus
Press the
MENU
settings of the PC monitor mode. Use the
cursor to adjust them (the settings are
automatically saved):
10
.
FM Radio
keys to select the FM
.
PC
).
key, select
AV
key to access the specific
station.
Using the radio menus
Use the
settings.
Searching radio stations
If you have used the quick installation all the
available FM stations will be stored.To start a
new search use the
(for a complete search) or
a station by station search).These menus work
in exactly the same way as the TV menus.
Screen saver
In the
the screen saver.The time, the frequency of
the station and its name (if available) move
across the screen.
• Picture:
-
Brightness / Contrast
brightness and contrast.
-
Horizontal / Vertical
and vertical placing of the image.
-
Colour Temp
normal or warm).
• Audio Selection: to choose the sound
and
reproduced on the TV (PC/HD,TV or Radio).
• Features (only available on certain versions):
-
Phase/Clock
(
Phase
-
Format
native format of the PC screens.
-
Auto Adjust
• Reset To Factory Setting: to return to the
factory settings (default settings).
key to access the specific radio
MENU
menu :
Install
Manual Store
menu you can activate / close
Features
: to adjust the
: to adjust the horizontal
: to adjust the colours (cold,
: eliminates the horizontal
) and vertical (
Clock
: to choose between full screen or
: position is set automatically.
Auto Store
(for
) interfering lines.