Sennheiser M3AEBTXL Instruction Manual page 15

▷
Connect your smartphone to the headphones using Bluetooth (>
Bluetooth device).
▷
Start the Smart Control app.
The Smart Control app recognizes the headphones and activates all available settings and functions.
Switching the headphones on
WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent
hearing defects.
▷
Before putting your headphones on, adjust the volume
to a low level (>
▷
Do not continuously expose yourself to high volume
levels.
WARNING
Risk of getting caught when unfolding the ear cups!
When unfolding the ear cups, you may get caught in the
joints and injure yourself.
▷
When unfolding the ear cups, keep sufficient distance to
the joints so that no skin is caught in the joints.
▷
Unfold the two ear cups (right and left).
The joints click into place. The headphones switch on. You hear the voice prompt "Power on" and
the LED lights up green for 2 seconds.
If a paired Bluetooth device is within the transmission range, you hear the voice prompt "Device (1)
connected". The LED lights up blue for 2 seconds.
Adjusting the volume).
Connecting the headphones to a
15