Sennheiser M3AEBTXL Instruction Manual page 13

Pairing the headphones with a Bluetooth device
1.Switch the headphones on (>
device (max. 20 cm).
2.Press and hold the voice assistant button for 5 seconds until you hear the voice prompt "Pairing".
The LED flashes blue and red. The headphones are in pairing mode.
3.Activate Bluetooth on your Bluetooth device.
4.Via the menu of your Bluetooth device, start the search for new Bluetooth devices.
All active Bluetooth devices in the proximity of your smartphone are displayed.
5.From the list of found Bluetooth devices, select "MOMENTUM 3". If necessary, enter the default pin
code "0000".
If pairing was successful, you hear the voice prompts "Pairing successful" and "Device (1)
connected". The LED lights up blue for 2 seconds.
Switching the headphones on) and place them close to the Bluetooth
13