8
Automatically install channels
1
Enter the Philips Hospitality setup menu.
2
to select CABLE TUNING.
Press
3
Press to select one of the following:
•
YES: To receive TV signals from a cable.
•
NO: To receive TV signals from an antenna.
4
to select AUTO INSTALL TV > START.
Press
5
Press to start the automatic installation of channels.
6
Press any key on the remote control to stop the automatic
installation of channels.
Note
•
This option is available only when you select CHANNEL INSTALL >
CHANNEL > INPUT > TUNER.
Select a virtual or physical channel
It is always recommended physical channels by setting USE CHANNEL
TABLE to NO.
1
Enter the Philips Hospitality setup menu.
2
Press
to select USE CHANNEL TABLE.
SETUP
LANGUAGE
COMMUNICATION
CHANNEL INSTALL
AUTO INSTALL TV
CABLE TUNING
USE CHANNEL TABLE
CURRENT RING
DIGITAL SETUP
CONFIGURATION
SMARTCLONE
Note
•
This option is available only when you select CHANNEL INSTALL >
CHANNEL > INPUT > TUNER.
Select a channel ring
Channels are organized in rings in Philips commercial televisions. To make
the channels visible to the guest, they must be assigned to the same ring that
the television is set to display as the current ring.
1
Enter the Philips Hospitality setup menu.
2
to select CURRENT RING.
Press
3
Press to select a list of channels to watch.
Note
•
If you select COMMUNICATION > SMART RC, RING4 is not available
(see 'Select the communication protocol' on page 10).
9
What the guest or the user actually access are program numbers. The TV
has program numbers 1 - 250 available. Any channel, or external input,
analog or digital can be mapped to any program number, giving the hotel
complete flexibility of channel mapping. For example, local channels could
be mapped to programs 1 - 9; News channels could be mapped to the
teens, Sports channels to the 20s etc.
Select the mode for signal reception
1
2
3
•
This section explains how to assign program numbers to be the same as the
program numbers that the guest can assess on the remote control.
1
2
3
ENGLISH
>
>
>
YES
NO
RING2
>
>
>
4
Select a program
1
2
3
•
Configure the channels
Enter the Philips Hospitality setup menu.
to select CABLE TUNING.
Press
Press to select one of the following:
•
YES: To receive TV signals from a cable.
•
NO: To receive TV signals from an antenna.
Note
This option is available only when you select CHANNEL INSTALL >
CHANNEL > INPUT > TUNER.
Enter the Philips Hospitality setup menu.
Press to select CHANNEL INSTALL.
Press to configure the channel settings.
CHANNEL INSTALL
CHANNEL
INPUT
CHANNEL LOGO
DIGITAL
RF CHANNEL NUMBER
RINGS
LABEL
MUTE
Press M on the Philips setup remote control or MENU on the guest
remote control to return to the main menu.
Enter the Philips Hospitality setup menu.
Press
to select CHANNEL INSTALL > CHANNEL.
Press 0-9 (Numeric buttons) to enter a program number.
•
For cable mode, select a number between 01 - 250.
•
For antenna mode, select a number between 02 - 250.
Note
To select a three digit program number, configure the TV using the
control options.
TV 2
TUNER
>
NO
2
>
(
) >
NONE
EN
11