Select a source of input
1
Enter the Philips Hospitality setup menu.
2
to select CHANNEL INSTALL > INPUT.
Press
3
Press to select a source of input.
Note
• External inputs can also be assigned to a program number
Select a logo for a channel
1
Enter the Philips Hospitality setup menu.
2
Press
to select CHANNEL INSTALL > CHANNEL LOGO.
3
Press to enter a page containing logos.
4
Press
to select a logo for the channel.
5
Press "0" to save the logo and exit the menu.
Map to a digital channel
1
Enter the Philips Hospitality setup menu.
2
to select CHANNEL INSTALL > DIGITAL.
Press
3
Press to select YES.
CHANNEL INSTALL
CHANNEL
INPUT
CHANNEL LOGO
DIGITAL
DIGITAL CH SCROLL
RF CHANNEL NUMBER
MPEG PROGRAM NUMBER
RINGS
LABEL
MUTE
4
Press to select DIGITAL CH SCROLL.
» Digital channel scroll works only for digital channels that have
already been installed ie by Automatic channel install - see section
8.
5
Press
to toggle between the available digital channels.
Note
•
Select CHANNEL INSTALL > DIGITAL > NO, if the channel is an analog
channel.
•
DIGITAL CH SCROLL, DIGITAL MAJOR CH, and DIGITAL MINOR
CH do not apply to analog channels.
•
When you select USE CHANNEL TABLE > NO to use physical channel
numbers instead of virtual channel numbers, DIGITAL MAJOR CH is
replaced by RF CHANNEL NUMBER and DIGITAL MINOR CH is
replaced by MPEG PROGRAM NUMBER on your TV screen.
12
EN
.
TV 2
TUNER
>
YES
>
80
2
>
(
) >
NONE
CHANNEL INSTALL
CHANNEL
INPUT
CHANNEL LOGO
DIGITAL
DIGITAL CH SCROLL
RF CHANNEL NUMBER
MPEG PROGRAM NUMBER
RINGS
LABEL
MUTE
Assign digital major and minor channels
1
Enter the Philips Hospitality setup menu.
2
Press
to select CHANNEL INSTALL > DIGITAL > YES.
3
Press to select DIGITAL MAJOR CHANNEL/ RF CHANNEL
NUMBER.
4
Press 0-9 (Numeric buttons) to enter a channel number between 1
and 999.
5
Press to select DIGITAL MINOR CHANNEL/ MPEG PROGRAM
NUMBER.
6
Press 0-9 (Numeric buttons) to enter a channel number between 0
and 32768.
Select a preferred list of channels
1
Enter the Philips Hospitality setup menu.
2
to select CHANNEL INSTALL > RINGS.
Press
3
Press
to select a ring number.
» A flashing red dash appears next to the selected ring.
CHANNEL INSTALL
CHANNEL
INPUT
CHANNEL LOGO
DIGITAL
DIGITAL CH SCROLL
RF CHANNEL NUMBER
MPEG PROGRAM NUMBER
RINGS
LABEL
MUTE
4
Press
to select or deselect a list.
» The selected list is marked by an "X".
TV 2
TUNER
>
YES
>
2
8
>
(
) >
NONE
TV 2
TUNER
>
YES
>
2
8
>
(
) >
NONE