Philips SLA5520/00 User Manual page 23

Group Details
Configuration wizard Select security type
Select WPA mode
Select code index
Only available when Advanced settings - Code management is enabled.
Enter security code
(WEP)
Enter security code
(WPA)
Select active code
WPA
WEP
None
TKIP
AES
Code 1
Code 2
Code 3
Code 4
Exit code editing
************
<Change>
************
<Change>
Code 1
Code 2
Code 3
Code 4
Explanation
The wireless network is secured (encrypted)
with WPA.
See the user manual of the wireless network
devices for information on how to identify the
security type (encryption type).
WPA, best - WiFi Protected Access
The wireless network is secured (encrypted)
with WEP.
See the user manual of the wireless network
devices for information on how to identify the
security type (encryption type).
WEP, good - Wired Equivalent Privacy.
The wireless network is not secured
(encrypted).
See the user manual of the wireless network
devices for information on how to identify the
security type (encryption type).
The WPA security type is TKIP.
This option is the default for WPA security.
TKIP - Temporal Key Integrity Protocol
The WPA security type is AES.
See the user manual of the wireless network
devices for information on how to identify the
WPA security type (WPA encryption type).
AES - Advanced Encryption Standard
1 Select the security code index (WEP key index)
2 Press 2 or OK.
Confirm the stored security code (WEP).
When in doubt - Change the security code
(WEP).
Enter the security code (WEP key).
It can be found in the base station (router).
See it's user manual for details.
Confirm the stored security code (WPA).
When in doubt - Change the security code
(WPA)
Enter the WPA security code.
It can be found in the base station (router).
See it's user manual for details.
Select the WEP security code identifier (WEP
key index). Range - 1 to 4. It can be found in
the base station (router). See it's user manual
for details.
WEP security code identifier - If more than one
WEP security code identifier (WEP key) is
entered, the code that is currently active must be
selected (key index)
EN
23