Table of Contents
Advertisement
Prompt
Select language
The configuration wizard and the settings menu will be displayed in your preferred language.
Load profile
Different profiles can be used to easily connect to different wireless networks
See Settings menu – Advanced settings – Profile management for details.
Select network
Select wireless mode
Select security type
Select WPA mode
Make sure to select the WPA security type that is configured on the network.
Connect
When switching on the SLA5520 for the first time, the Configuration wizard will
appear automatically.
If you wish to change network settings afterwards, you have to restart the
Configuration wizard.
1 Press Settings (17).
2 Select Configuration wizard (4 or 3).
3 Press 2 or OK (16).
The configuration wizard may prompt for the following information.
Depending on the network configuration, the SLA5520 determines some settings
automatically.
Possible options
English
Francais
Italiano
Deutsch
Espanol
Nederlands
Profile 1
Profile 2
Profile 3
Network 1 (SSID)
Network 2 (SSID)
Other (Advanced)
Network (Infrastructure)
Point to point (Ad-Hoc)
WPA
WEP
None
Make sure to select the security type that is configured on the network.
TKIP
AES
Action
1 Select your preferred language (4 or 3).
2 Press 2 or OK.
1 Select the profile you wish to alter.
2 Press 2 or OK.
1 Either - Select the network to which the SLA5520
should connect.
Or - Select Other (Advanced) to enter the network
name (SSID) manually.
2 Press 2 or OK.
1 Either, preferred - Select Network (Infrastructure)
Or - Select Point to point (Ad-Hoc). Only if none
of the following devices is available: base station,
router, gateway or access point.
2 Press 2 or OK.
1 Either - select WPA.
Or - select WEP.
Or - select None.
2 Press 2 or OK.
1 Either, used most often - Select TKIP.
Or - select AES.
2 Press 2 or OK.
EN
13
Advertisement
Table of Contents
