Table of Contents
Advertisement
Prompt
EN
Select code index
Enter security code (WEP) **********
Enter security code (WPA) **********
Select network settings
Apply settings?
Save to profile
14
Possible options
Code 1
Code 2
Code 3
Code 4
Exit code editing
Make sure to select the code index (WEP key index) that is used by the network.
See Settings menu – Advanced settings – Code management for details.
<Change>
Make sure to enter the security code (WEP key) that is used by the network.
<Change>
Make sure to enter the security code (WPA key) that is used by the network.
Automatic (DHCP)
Manual (Static IP)
Yes
No
Profile 1
Profile 2
Profile 3
Different profiles can be used to easily connect to different wireless networks
See Settings menu - Advanced - Profile management for details.
Your action
1 Select the security code index (WEP key index).
2 Press 2 or OK.
1 Either - select <Change> to enter the security code
(WEP key).
Or - select ******** to confirm the stored security
code (WEP key).
2 Press 2 or OK.
1 Either - select <Change> to enter the security code
(WPA key).
Or - select ******** to confirm the stored security
code (WPA key).
2 Press 2 or OK.
1 Either, used most often - Select Automatic (DHCP)
Or - Select Manual (Static IP). For experienced
users. The product identification number
(IP address), Netmask, Gateway and preferred
DNS server must be entered manually.
2 Press 2 or OK.
1 Either - Select Yes.
Or – discard settings - Select No.
2 Press 2 or OK.
1 Select the profile you wish to alter.
2 Press 2 or OK.
Advertisement
Table of Contents
