Panasonic EP3513-U1 Servise Manual page 16

EP3513
7. Push the Massage mechanism block and remove the special
tool.
Caution
If you remove the tool, the Massage mechanism block may fall
down at your side.
8. Move the Massage mechanism block upward and remove it
from the Back frame.
9. When you install the Massage mechanism block, execute the
reverse procedures.
Caution
- Push the Massage mechanism block so that it does not fall
down.
Be sure to install the correct side Rail piece sets.
Caution when handling the Massage mechanism block
Be sure to handle the Massage mechanism block carefully so that the PCB of the Pressure sensor is not pushed to the desk or
given extra pressure when putting the Massage mechanism block, which could lead to the cracks of the PCB.
eventually cause the malfunction such as 'The body pressure levels on the Controller does not increase.' 'It does not scan.' or
'The operation is not stable.' Etc.
- 16 -
ORDER NO.HPD0509U24C1
This may