Qt/Dqt Setup (Analogue) - Kenwood ProTalk DIGITAL TK-3701D User Manual

QT/DQT SETUP (ANALOGUE)

Quiet Talk (QT) and Digital Quiet Talk (DQT) are functions that reject undesired
signals on your channel. You will hear a call only when you receive a signal that
contains a matching QT tone or DQT code. If a call containing a different tone or
code is received, squelch will not open and you will not hear the call. Likewise,
when transmitting using QT or DQT, the receiving station must have a matching
tone or code to hear your call.
Be aware that other parties can still hear your calls if they set up their transceiver
with the same tone or code.
The default QT/DQT settings for each channel are provided in the table {p. 10}.
To change the QT/DQT settings of a channel of Analogue:
During Setup Mode Selection, rotate the Selector to select a channel number.
1
• The transceiver announces the zone number and channel number.
Press the PTT switch to set the channel number.
2
Press the Side 1 or Side 2 button to select the QT/DQT Setup Mode.
3
• The transceiver announces "QT/DQT".
Press the PTT switch to enter QT/DQT Setup Mode.
4
• Beep A (1 beep) will sound and the transceiver announces the QT/DQT
table number.
Press the Side 1 or Side 2 button to increment/ decrement the QT/DQT table
5
number.
• QT/DQT table numbers and their corresponding tones/ codes are provided
in the table {p. 17}.
• Press and hold the Side 1 or Side 2 button to increment/ decrement the
Tone number by 5 at a time.
• A voice announcement will inform you of the currently selected QT/DQT
table number.
Press the PTT switch to temporary save the selected QT/DQT.
6
• Beep B (2 beeps) will sound.
• Repeat steps 1 to 6 to set up another channel.
Press the Side 1 or Side 2 button to select the Confirmation Setup Mode.
7
• The transceiver announces "Confirm".
Press the PTT switch to save the setting and return to zone selection.
8
• Beep B (2 beeps) will sound.
Note:
◆ The transceiver will automatically return to normal operation if no action is performed for
20 seconds.
16