Checking The Memory Capacity; Changing Memory Module - Fujitsu LIFEBOOK P8010 Manual

Checking the memory
capacity
If the memory is not installed correctly,
an error message "Expansion memory
error" may be displayed when you turn
on the notebook. If such a message
appears, turn off the notebook, remove
the memory module and reinstall it.
1. Turn on the notebook.
2. Click the Start button and select Control
Panel.
The Control Panel window appears.
3. Click System and Maintenance.
4. Click System.
5. Check whether the numeric value has
increased by the size of the memory you
have added.
The notebook specifications may vary
between countries, please check with your
local distributor for actual configuration.
If the numeric value displayed does not
agree with the memory capacity of your
notebook, check the newly installed
memory module.
However, in the case of a system with
integrated graphics solutions, or shared
graphics solutions that utilizes a portion
of a computer's system RAM, the total
memory size available to the Operating
System will be less than the size of
installed memory module(s).
38

Changing memory module

The memory module installed on your notebook
can be replaced with a larger size of memory.
1. Turn off the notebook and disconnect the
AC adapter from it.
2. Close the LCD panel and place the
notebook upside down.
3. Remove the battery pack.
4. Remove the screw(s) securing the
memory compartment cover and remove
it.
Remove memory compartment cover at the
bottom of the notebook.
RAM module
slot cover
Slot 1