Fujitsu LIFEBOOK P8010 Manual page 51

5. Remove the memory module.
Displace the hook on each side from the
memory module. The memory module
comes up slightly. Pull the memory module
diagonally up to detach it from the slot.
6. Install a new memory module.
Insert the memory module diagonally into the
slot with the notch in the memory module
aligned with the projection on the connector.
Push memory module down until it clicks into
place.
7. Attach the memory compartment cover.
Claw
8. Attach the battery pack
Adding Memory
Reattach the memory compartment cover
removed earlier on.
RAM module slot cover
Reattach the battery pack removed earlier
on.
After you have installed or remove a
memory module, check the memory
capacity of you notebook to verify that the
memory module is installed properly.
39