Checking The Memory Capacity - Fujitsu LifeBook P Series Manual

11. Slide the keyboard backward to return it
to its original position.
Fit the tabs on the keyboard in the locating
holes of the notebook.
Tabs on the keyboard
12. Attach the cover.
Attach the cover removed in step 5. Insert
each end of the cover correctly in the hole of
the notebook
13. Close the LCD panel, turn the computer
upside down, and secure the cover with
screws.
14. Install the internal battery pack.
Checking the memory
capacity
Keyboard
1. Turn on the computer.
2. Click the "Start" button and select
3. Click "Performance and Maintenance",
4. Check if the circled numerical value in the
U s e r - I n s t a l l a b l e Fe a t u r e s
If the memory is not installed correctly,
an error message "Expansion memory
error" may be displayed when you turn
on the computer. If such a message
appears, turn off the computer, remove
the memory and reinstall it.
"Control Panel".
The Control Panel window appears.
and then "System".
The "System Properties" dialog box appears.
figure below has increased by the size of
memory you added.
Memory capacity
In this example, 256 MB of memory added
to a notebook.
– The system uses 8 MB of memory for
internal usage, so that a memory
capacity smaller than the actual installed
memory capacity is shown in this
window.
19