Fujitsu LIFEBOOK P8010 Manual page 60

Problem
Shutdown and Startup Problems
The Power/Suspend/
The Power
Suspend/Resume Resume button is disabled
button does not from the Advanced
submenu of the Power
work.
Options menu.
You did not hold the
button long enough to
activate this feature.
There may be a conflict
with the application
software.
The system The boot sequence
powers up and settings of the setup utility
are not compatible with
displays power-on
information, but your configuration.
fails to load the
operating system.
You have a secured
system requiring a
password to load your
operating system.
Internal hard drive was
not detected.
An error message Power On Self Test
is displayed on the (POST) has detected a
problem.
screen during the
boot sequence.
48
Possible Cause
Enable the button from the setup utility.
Hold the button longer. This may require a few
seconds if your application is preventing the
CPU from checking for button pushes.
Close all applications and try the button again.
Set the operating source by pressing the
[ESC] key while the Fujitsu logo is displayed
on screen or use the [F2] key and enter the
setup utility and adjust the source settings
from the Boot menu.
Make sure you have the right password. Enter
the setup utility and verify the Security settings
and modify them as accordingly.
Use the BIOS setup utility or Primary Master
submenu, located within the Main menu, to try
to auto detect the internal hard drive.
See the Power On Self Test (POST) messages
to determine the meaning and severity of the
problem. Not all messages are errors; some
are simply status indicators.
Possible Solution