3 Connect the other end of the AC adaptor to the wall outlet.
Set time and date
1 In standby mode, press and hold TIME SET/AUTO SCAN for 2
seconds.
The hour digits are displayed and begin to blink.
»
2 Press TUNING +/- to set the hour.
3 Press TIME SET/AUTO SCAN to confi rm.
The minute digits are displayed and begin to blink.
»
4 Repeat steps 2-3 to set the minute, year, month, day and 12/24
hour format.
Turn on
1 Press POWER .
The unit switches to the last selected source.
»
Switch to standby
1 Press POWER again to switch the unit to standby mode.
The time and date (if set) appear on the display panel.
»
Adjust volume
1 During play, press VOL +/- to increase/decrease the volume.