Set Time And Date; Turn On - Philips DC295 User Manual

1
Open the battery compartment.
2
Insert 2 x AA size batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.

Set time and date

1
In standby mode, press and hold SET TIME
for 3 seconds.
» [24H /12H] begins to blink, and you
can hear a beep.
2
Press TUNING + or TUNING - to select
the 12/24 hour format.
3
Press OK to confirm.
» 0:00 will display, and the hour digits
begin to blink.
4
Press TUNING +/ TUNING - to set the
hour.
5
Press OK to confirm.
» The minute digits begin to blink.
6
Repeat steps 4-5 to set the minute, day,
month and year.
Tip
•
In 12 hour format, [MONTH--DAY] is displayed.
•
in 24 hour format, [DAY--MONTH] is displayed.
Note
•
When iPod/iPhone/iPad is connected, the clock
radio synchronizes time from the iPod/iPhone/iPad
automatically.
EN
9

Turn on

1
Press POWER.
» The unit switches to the last selected
source.
Switch to standby
1
Press POWER again to switch the unit to
standby mode.
» The time and date (if set) appear on
the display panel.
Select source
1
Press SOURCE repeatedly to select from
DOCK, FM and AUDIO IN.