Table of Contents
Advertisement
4
88
Repeatedly press button 1 until
desired heating stage 2 ap-
pears on the display.
z
The handlebar grips have two-
stage heating.
50% heating power
100% heating power
Stage 2 is for heating the grips
quickly: it is advisable to switch
back to stage 1 as soon as the
grips are warm.
The selected heating stage will
be saved if you allow a certain
length of time to pass without
making further changes.
In order to switch off the
heated handlebar grips,
repeatedly press button 1 until
the heated handlebar grip
symbol 2 is no longer shown
on the display.
Front and rear seats
Removing rear seat
Place the motorcycle on its
stand on firm, even ground.
Turn the key clockwise in seat
lock 1 and hold it in this pos-
ition while pressing down the
rear part of rear seat 2.
Lift the rear seat at the front
and release the key.
Remove the rear seat and
place it, upholstered side down,
on a clean surface.
Install the rear seat
ATTENTION
Damaged components
Damage to sensors, for example,
which causes malfunctions
Do not transport any objects
underneath the driver or pas-
senger seat.
Secure the toolkit.
Advertisement
Table of Contents
