Table of Contents
Advertisement
Press and hold the button 1
until the DTC indicator and
warning light changes status.
DTC indicator and warning
light shows.
Release button 1 within two
seconds.
DTC indicator and warning
light remains on.
DTC is switched off.
DTC Switching on
Press and hold button 1
until the DTC indicator light
changes its status.
DTC indicator and warn-
ing light goes out; if self-
diagnosis has not completed, it
starts flashing.
Release button 1 within two
seconds.
DTC indicator and warning
light remains off or contin-
ues to flash.
DTC is switched on.
If the encoding plug is not in-
serted, you have the alternative
of switching the ignition off and
back on again.
A DTC fault has oc-
curred if the DTC telltale
light shows when the motor-
cycle accelerates to a speed
in excess of the minimum
stated below after the igni-
tion was switched off and then
on again.
min 10 km/h
See the section "Engineering
details" for more information
on BMW Motorrad Dynamic
Traction Control (DTC):
How does traction control
work? (
126)
Electronic Suspension
Adjustment (DESA)
OE
with Dynamic ESA
4
71
z
Advertisement
Table of Contents
