Hazard Warning Lights System; Tem - BMW R 1200GS Rider's Manual

The indicator light for the
4
automatic daytime riding
light lights up.
60
If the ambient brightness de-
creases below a certain value,
the low beam headlight is auto-
matically switched on (e. B.
in a tunnel). When sufficient
ambient brightness is detec-
ted, the daytime riding light is
switched back on. When the
z
daytime riding light is active,
the daytime riding light symbol
is displayed in the multifunction
display.
Manual operation of the
light when the automatic
system is switched on
If you operate the button
for the daytime riding light,
the daytime riding light is
switched off and the low-beam
headlight and front side lights
are switched on (e.g. when
you ride into a tunnel and the
response of the automatic
daytime riding light to the
change in ambient brightness
is delayed). The auxiliary
headlight switches on again
when the daytime riding light is
switched off.
If you operate the button again,
the daytime riding light is re-
activated, in other words, the
daytime riding light is switched
on again when ambient bright-
ness is adequate.
Hazard warning lights
system
Operating hazard warning
flashers
Switching on ignition (
NOTICE
The hazard warning flashers
place a strain on the battery.
Do not use the hazard warning
flashers for longer than absolutely
necessary.
Press button 1 to switch on
the hazard warning lights sys-

tem.

General warning light
flashes red.
Turn signal indicator light
flashes green.
50).
Ignition can be switched off.
To switch off the hazard warn-
ing lights system, switch on
the ignition and press button 1
again.