Installing The Ce Decal; Installing The Hood Latch (Ce Only) - Toro Reelmaster 3550 Operator's Manual

3

Installing the CE Decal

Parts needed for this procedure:
1 Warning decal (120-1686)
Procedure
If this machine will be used for CE, affix the warning decal
120-1686 over English warning decal 120-1683.
4
Installing the Hood Latch (CE
Only)
Parts needed for this procedure:
1 Lock bracket
2 Rivet
1 Washer
1 Screw (1/4 x 2 inches)
1 Locknut (1/4 inch)
Procedure
1. Unhook the hood latch from the hood-latch bracket.
2. Remove the 2 rivets securing the hood-latch bracket
to the hood (Figure
bracket from the hood.
2
Figure 13
1. Hood-latch bracket
13) and remove the hood-latch
1
G012628
2. Rivets
3. While aligning the mounting holes, position the CE
lock bracket and the hood-latch bracket onto the hood.
Note: The lock bracket must be against the hood
(Figure 14). Do not remove the bolt and nut from the
lock-bracket arm.
1. CE lock bracket
4. Align the washers with the holes on the inside of the
hood.
5. Rivet the brackets and the washers to the hood
14).
6. Hook the latch onto the hood-latch bracket
1
1. Hood latch
7. Screw the bolt into the other arm of the hood-lock
bracket to lock the latch in position
Note: Tighten the bolt securely but do not tighten
the nut.
g012628
14
1
2
G012629
Figure 14
2. Bolt and nut
(Figure
G012630
Figure 15
(Figure
g012629
(Figure
15).
g012630
16).