Cisco PA-2CT1 Installation And Configuration Manual page 13

Figure 7 VIP2-15 or VIP2-40 with a 2CT1 Port Adapter in Port Adapter Slot 1
Bus connector
SRAM
DIMM U5
4E in port
adapter
slot 0
Port adapter handles not shown
Port adapters have a handle attached, but this handle is not shown to allow a full view of detail
Note
on each port adapter's faceplate.
Figure 8 shows two 2CT1 port adapters installed in port adapter slots 0 and 1, on a VIP2-50.
Figure 8 VIP2-50 with Two 2CT1 Port Adapters in Port Adapter Slots 0 and 1
Bus connector
SRAM
daughter
card
2CT1 in port
adapter slot 0
Port adapter handles not shown
CPU Boot ROM
U6
U2
U4
ETHERNET-10BT
CPU
Boot ROM
Channelized T1 Port Adapter Installation and Configuration
VIP2 and the 2CT1 Port Adapter
DRAM
SIMMs
2CT1 in port
adapter slot 1
SDRAM DIMM
2CT1 in port
adapter slot 1
13