Connections On The Flue Gas Side; Back Panels And Therm-Control Sensor - Viessmann Vitorond 200 Series Installation Instructions Manual

Connections on the flue gas side

D
x Ø
2 - 3
Ø D
Ø10 mm
Fig. 18

Back panels and Therm-Control sensor

2.
3
4
Fig. 19
Therm-Control sensor (NTC 10 k
A
separately.
Note
Insert Therm-Control sensor (NTC 10 k
possible between the 3rd and 4th sections (from the
back).
22
1. Connect the flue outlet with the shortest possible
2. Create a test port.
3. Seal in and insulate the flue pipe. Joints must be
B 3.9 x 9.5
1.
3x
1
2
3
4
) is supplied
Ω
) as far as
Ω
Vitoair installation instructions
run to the chimney and maintain a slight incline.
External Ø, flue outlet: 200 mm
gas-tight.
M 6 x 10
4x
3.