Switch Off The Projector - BenQ LX785 User Manual

Fine turning the image size and clarity
1. Adjust the projected image to the size that you need using the ZOOM ring.
2. Sharpen the image by rotating the FOCUS ring.

Switch off the projector

1. Press POWER or OFF and a confirmation message will appear prompting you.
If you don't respond in a few seconds, the message will disappear.
2. Press POWER or OFF a second time. The POWER indicator light flashes orange, the
projection light source shuts down.
3. Once the cooling process finishes. The POWER indicator light is a steady orange and fans
stop. Disconnect the power cord from the power outlet.
Caution:
• To protect the light source, the projector will not respond to any commands during the cooling process.
POWER or ON again to start the projector after the POWER indicator light turns orange.
• Press
Zoom ring
Focus ring
35