Pride Mobility RISER RECLINER Series Owner's Manual page 19

V. OPERATION
Follow these steps to raise or lower the footrest while in the seated or reclined position (Fig. 5.3):
1. Slide the inhibit switch to the left.
2. Engage and hold the up/down switch in the DOWN position until the footrest is fully elevated.
3. Engage and hold the up/down switch in the UP position to lower the footrest.
Follow these steps to stand up from your riser recliner from the seated position (Fig. 5.3):
1. Slide the inhibit switch to the left.
2. Engage and hold the up/down switch in the UP position to raise your riser recliner.
3. Release the switch when the riser recliner reaches a height where you can stand up comfortably.
Keylock
Your hand control is equipped with a keylock feature (Fig. 5.1). The keylock feature is intended to disable all
functions of the hand control to prevent unintended movement when the riser recliner is occupied, but sta-
tionary, as well as when the riser recliner is left unattended. The key should only be inserted into the hand
control when the position of the riser recliner needs to be adjusted by the user.
Follow these steps to operate the keylock:
1. Remove the key from the side of the hand control to disable all functions of the hand control.
2. Reinsert the key to restore hand control function.
WARNING! Prevent unintended movement and/or injury! Remove the key to lock the
hand control once the riser recliner is positioned to the desired setting by the user
and any time the riser recliner is left unattended.
NOTE: As an added safety measure, Pride recommends that you utilise the quick disconnect to
remove the hand control from the riser recliner and store the hand control out of the reach of
children when not in use.
Riser Recliner Series www.pridemobility.com
RISER RECLINER SERIES
19