Assembly/Disassembly; Riser Recliner Set-Up - Pride Mobility RISER RECLINER Series Owner's Manual

RISER RECLINER SERIES
Your riser recliner may require some assembly before initial use. It may also require disassembly
to make servicing the riser recliner more convenient. If your riser recliner is a Knock-Down (KD)
model, follow the instructions in "Riser Recliner Set-up." If your riser recliner is not a KD model,
proceed to "Riser Recliner Placement."

RISER RECLINER SET-UP

KD models will arrive in the knock-down position (Fig. 4.1).
Figure 4.1 Knock-Down (KD) Position
Follow these steps to assemble the riser recliner:
4.1.1 Remove the packaging from the back portion
of the riser recliner and check that the locking
clip is in the vertical position. Reposition if
necessary.
12
4.1.2 Slide the left and right KD sleeves of the
chair-back onto the KD connections on the
arms and seat of the riser recliner.
www.pridemobility.com
IV. ASSEMBLY/DISASSEMBLY
Riser Recliner Series