Alternative Wi-Fi Setup; Connecting Your Telo Using Ethernet - ooma Telo Air 2 Quick Start Manual

Alternative Wi-Fi Setup

We recommend using the Ooma Telo setup app for Wi-Fi setup. If you cannot use the mobile app,
follow the instructions below:
Connect a Computer to your Ooma Telo
Power on your Telo Air using the included AC cord. It is
normal for the lights on the Telo to blink for a couple of
minutes while it boots up.
When the device has booted up, use the included
Ethernet cable to connect a computer to the HOME
port of the Telo.
20
Configure Wireless Settings
Open a browser on the computer connected to the
Telo and navigate to setup.ooma.com, a special site
embedded in your Telo.
Click the Wireless tab on the left side of your screen.
Follow the onscreen instructions to conenct the Telo
to your Wi-Fi network using your network name
and password.
!
IMPORTANT:If the
computer has Wi-Fi, it must
be disabled. The computer
must have a wired connection
to the Telo.

Connecting Your Telo Using Ethernet

If you do not wish to connect your Telo to your Wi-Fi network, you can use
a hardwired connection instead. Insert one end of the Ethernet cable into
the INTERNET port on the back of the Telo. Connect the other end of the
cable to an open port on your router.
Plug the included AC adapter into the POWER port. The Ooma logo will blink
few minutes. When it turns blue, the Telo is ready.
red for a
21