Receiving The Sb755 - Invacare ScanBed 755 User Manual

4.

Receiving the SB755

To avoid condensation, the bed should not be used until it has reached
a temperature of 10-50° C.
Check whether the bed shows any signs of damage.
If the bed is damaged, see terms of delivery.
If the bed has been delivered in parts, it must
be assembled. Cf. chapter 6 "Disassembly/
Assembly of the SB755
Check, that the connection between mattress
support and base frame is properly locked
(cf. the picture).
Check that all plugs of the motors and hand
control are correctly connected to the control
unit according to the printed symbols. Check
that top frame head- and foot are completely
pushed together, that the lock pin is engaged,
that the seat section is completely down, and
that bed ends are correctly attached.
Disconnect the plug from the mains before moving the bed.
The cable must be kept clear off the floor and the castors during transport.
Connect the SB755
Mount the accessories: Bed ends, side rails, lifting pole and bumper wheel.
Cf. chapter 5 "Fitting the accessories".
UM_1518190_GB_DK_SE_NO_FI_DE_NL_FR_IT_PT_ver06.indd 13
TM
TM ".
TM
to the mains.
Locked pin / snap lock
Unlocked pin / snap lock
13
2011-11-08 15:23:51