Fat Channel Controls - PRESONUS StudioLive III Series Addendum

3 Controlling Studio One
3.3

Fat Channel Controls

3.3 Fat Channel Controls
Level
Page
OL
-2 Processor
(Insert)
-12
-24
Channel
-36
-48
-65
Input Mic/Line Assign Stereo
Ch 1 Ch 2 Ch 4 Ch 4
1 2 3 4
Press Input in the Fat Channel to access the following Channel controls:
Please note: Because of their unique Fixed Mode Fat Channel design, this functionality is
not available for the StudioLive 32SX and StudioLive 32SC.
EQ / Dyn
Preset
1
Ch 5
5
PAN
<C>
Center
1. Pan. Use the encoder to adjust the panning of the currently selected
channel. The current pan position will be displayed on the scribble strip
display. Press the button to reset the pan position to the center.
Power User Tip: Panning can also be adjusted using the value encoder and the
touchscreen on your mixer. See Section 3.4 for more information.
2. Monitor. Press this button to enable monitoring on the selected
channel. Press and hold it to enable monitoring on multiple channels
at once by pressing the Select buttons on the desired channels.
3. Record. Press this button enable record arm on the selected channel. Press
and hold it to arm multiple channels for recording by pressing the Select
buttons on the desired channels. See Section 3.2.1 for more information.
4. Edit. Press this button to open the Control Link editor for your
StudioLive mixer in Studio One. From this window, you can assign any
function in your session to the knobs and buttons in the Fat Channel
section on your mixer. See Section 3.7 for more information.
5. Input. Turn the encoder to change the Input for the selected channel.
6. Output. Turn the encoder to change the Output for the selected channel.
7. Automation Mode. Turn the encoder to change the Automation
mode for the selected channel. This mode can also be changed
from the touchscreen, see Section 3.4 for more information.
2 3 4
Monitor Record Edit
StudioLive™ Series III
Studio One DAW Control Addendum
5 6 7
INPUT OUTPUT AUTO
Mode
Input 1 Main L-R Read
4