Transport Screen (Software Control Mode) - PRESONUS StudioLive III Series Addendum

3 Controlling Studio One

3.8.1 Transport Screen (Software Control Mode)

Studio One 4.1.4.51037 macOS x64
16.5.199.69
RedStick -PreSonusAudio
Control Network Transport Controls
IP Address: 169.254.107.71
Self Assn. Manual SD Card Software Control
Renew Lease
B
FX
FX D
EFFECTS MASTER MASTER CONTROL
Transport Screen (Software Control Mode)
3.8.1
Sends Auto
Reverb Off
Main Out Read
Drums Touch
Latch
Write
Monitor
From the UCNET screen, you have the option to select which recording device the
Transport will control: SD Card or Software Control.
When SD Card is active, the Transport will control the SD Capture session when DAW
mode is inactive. When Software Control is active, the Transport will control the
connected Studio One session whether DAW mode is active or not.
Monitor
While Software Control mode is active, pressing the Edit button in the Live Recording
section will open the Transport screen:
1
2
3
4
5
6
7
1. Session Name. Displays the current session's name.
2. Current Position. Displays the current position of the playback cursor.
3. Loop Length. Displays the current loop length.
4. Time Signature and Tempo. Displays the time signature
and tempo of the current Studio One session.
5. Record Mode. Tap to enable / disable Record Replace Mode.
6. Preroll. Tap to turn Preroll on or off.
7. Click. Tap to turn Click on or off.
8. Previous Marker. Tap to go to the previous marker.
9. Rewind. Tap and hold to rewind playback position.
10. Fast Forward. Tap and hold to fast forward playback position.
11. Next Marker. Tap to go to the next marker.
12. Return to Zero. Tap to return the playback cursor to the zero position.
13. Stop. Tap to stop playback.
14. Play. Tap to start playback.
15. Record. Tap to engage record.
16. Loop. Tap to turn looping on or off.
StudioLive™ Series III
Studio One DAW Control Addendum
10