Clock; Timer - Philips FW798W/22 User Manual

CLOCK

MINI HIFI SYSTEM
PROGRAM SHUFFLE
REPEAT

TIMER

REC
NEWS T.A. AM MW FM LW
60Hz 250Hz
STANDBY
ON
CLOCK/
TIMER CD1 • 2 • 3
CD TUNER
PROG
SEARCH • TUNING STOP • CLEAR
SOUND NAVIGATION
INCREDIBLE
SURROUND
DIGITAL
SOUND CONTROL
Viewing the Clock
You can view the clock (if it is set) while
the system is in standby mode or any
source mode. It will be displayed for about
7 seconds.
• Press CLOCK/TIMER briefly (on the
system only) .
™ "10:38" (the current time) will be
displayed.
™ "--:--" will be displayed if the
clock is not set.
26
Untitled-7 26
C
STEREO
BACK
FRONT HSD
L R
500Hz 4KHz 8KHz
1KHz 2KHz
PRO LOGIC
DOLBY B
S S
NR
RDS
RDS
NEWS/TA
NEWS!
BAND CDR
TAPE 1 • 2
VOLUME
TAPE AUX
A. REV
SIDE A•B PRESET
PLAY PAUSE PREV NEXT
MIC
LEVEL
DYNAMIC BASS
BOOST
Setting the Clock
The clock is set in 24-hour mode, e.g.
"00:00" or "23:59". Before setting
the clock, you must be in the View Clock
mode.
1 Press CLOCK/TIMER to select clock
mode.
™ "00:00" or the current time starts
flashing.
2 Set the hour with à or á.
3 Set the minute with í or ë.
4 Press CLOCK/TIMER again to store the
setting.
™ The clock starts.
• To exit without storing the setting, press
Ç on the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
– To set the time with RDS clock, see
"Receiving RDS Radio Station" under
TUNER section.
MIC
Setting the Timer
• The system can switch on to CD,
TUNER, or TAPE 2 mode automatically
at a preset time. It can serve as an
alarm to wake you up.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will start to
increase from the minimum level
until the volume level before the set
is switched to standby mode.
1 Press and hold CLOCK/TIMER for more
than 2 seconds to select timer mode.
™ "00:00" or the last set timer starts
flashing. The flag flashes.
TIMER
™ The last selected source is lit while
other available sources are flashing.
6/15/00, 12:51 PM
TIMER
2 Press CD, TUNER or TAPE to select the
desired source.
• Before selecting CD or TAPE, make sure
a CD or tape is loaded in the CD tray or
tape deck 2.
3 Press à or á to set the hour for the
timer to start.
4 Press í or ë to set the minute for
the timer to start.
5 Press CLOCK/TIMER to store the start
time.
™ The timer is now set.
™ The flag remains on the display.
TIMER
• At the preset time, the timer will be
activated.
™ The selected source will be played.
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the last
tuned frequency will be switched on.
– If the source selected is CD, playback
will begin with the first track of the last
selected disc. If the CD trays are empty,
the TUNER will be selected instead.
– If the source selected is TAPE, and if the
preset time is reached during high
speed dubbing, the TUNER will be
selected instead.
3139 116 18884