Surround Out (Wireless) - Philips FW798W/22 User Manual

DOLBY PRO LOGIC
7 Adjust the sound of all the speakers
until they are equal. When you are
satisfied with the setting, press TEST
TONE again to switch off the test
signal.
Note:
– It is advisable to set the speakers' level
at normal listening level. " XX " denotes
the sound level.
When you have completed the Dolby Pro
Logic setup, you are ready to enjoy Home
Cinema sound.
• Press DPL (PRO
LOGIC) repeatedly to
DPL
select and cycle through
BALANCE
the various sound
L R
modes.
Dolby Surround ™ Center
Phantom ™ Dolby 3 Stereo ™
Stereo ™ Dolby Surround ...
™ The Dolby Pro Logic display panel
will light up with the selection.
16
Untitled-7 16
Dolby Surround
This setting is for a full Dolby Surround Pro
Logic mode.
• Press DPL to select the Dolby Surround
mode.
™ The message
"DOLBY
C
SURROUND"
L R
will be
PRO LOGIC
S S
displayed.
™ The DPL display
panel will light
up.
M
Dolby Center Phantom
This setting is for use without the center
speaker. It redistributes the center speaker
sound to the left and right speakers,
providing conventional stereo across the
front.
• Press DPL to select the Dolby Pro Logic
Center Phantom mode.
™ The message
"CENTER
C
PHANTOM"
L R
will be
PRO LOGIC
S S
displayed.
™ The DPL display
panel will light
up.
Dolby 3 Stereo
Use this setting when full surround is not
required, but a wide stereo sound is
desired. It only requires the left, right and
center speakers.
• Press DPL to select the Dolby 3 Stereo
mode.
™ The message
"DOLBY 3
C
STEREO"
will be
L R
PRO LOGIC
displayed.
S S
™ The DPL display
panel will light
up.
Normal Stereo
This setting is for normal stereo sound
without Dolby Pro Logic. It only requires the
left and right speakers.
• Press DPL to select the Stereo mode.
™ The message
"STEREO"
C
will be
L R
displayed.
PRO LOGIC
S S
™ The DPL display
panel will light
up.
6/15/00, 12:50 PM
Important!
1 For the best Dolby Pro Logic sound,
switch on DPL with DSC set to
"Classic" and with Incredible
Surround off.
2 Dolby Pro Logic mode will
automatically switch to normal
Stereo mode when headphones are
connected.
3 Switch to normal stereo mode when
you record on a tape.
3139 116 18884