Table of Contents
Advertisement
Compact Disc
Reviewing the programme
Reviewing of the programme is possible only
when playback is stopped.
¶ Pressí or ë repeatedly to review the
programmed tracks.
¶ Press Ç to exit review mode.
Playing the programme
1
Press É to start programme playback.
"PLAY PROGRAM" will be displayed.
The track number and elapsed playing time of
the current track will appear on the display.
¶ If you press REPEAT during programme
playback, the current track or all programmed
tracks will be played repeatedly.
"TRACK" or "PROGRAM" will be displayed.
The REP and PROG flags appear on the
display.
2
Press Ç to stop programme playback.
Notes:
– If you press any of the DISC DIRECT PLAY
buttons, the system will play the selected disc and
the stored programme will be ignored temporarily.
The PROG display also will disappear temporarily
from the display. It will reappear when playback of
the selected disc ends.
– REPEAT DISC mode will be cancelled when
programme playback begins.
Erasing the programme
playback is stopped)
¶ Press Ç.
"PROGRAM CLEARED" will be displayed.
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
CD changer tray is opened.
16
pg 01-27/C100/22-Eng
Shuffle
In shuffle mode, the system plays all the available
discs and their tracks in random order. Shuffle
may be used also when tracks are programmed.
To shuffle all the discs and tracks
1
Press SHUFFLE.
"SHUFFLE" will be displayed.
The SHUF flag and the track selected at
random appear on the display.
¶ The discs and the tracks will be played in
random order until you pressÇ.
¶ If you press REPEAT during shuffling, the
current track or all available discs will be played
repeatedly.
"TRACK" or "ALL DISC" will be displayed.
The REP and SHUF flags appear on the
display.
2
Press SHUFFLE again to resume normal
playback.
The SHUF flag disappears from the display.
Note:
– REPEAT DISC mode will be cancelled when
shuffle is selected.
Repeat
You can play the current track, a disc or all
available discs repeatedly.
1
Press REPEAT on the remote control to select
the various repeat modes.
(when
"TRACK", "DISC", "ALL DISC" or "OFF" will
be displayed.
The REP flag appears on the display.
¶ The selected track, selected disc or all available
discs will now be played repeatedly until you
pressÇ.
2
Press REPEAT until the "OFF" mode is
displayed to resume normal playback.
The REP flag disappears from the display.
Notes:
– REPEAT DISC mode is not available during
programme play or shuffle mode.
– You can also repeat shuffling a programme.
i) "TRACK" or "PROGRAM" will be displayed.
ii)The REP, PROG, and SHUF flags appear on
the display.
16
(only on remote control)
(only on remote control)
3139 115 20281
12/6/00, 3:18 PM
Advertisement
Table of Contents
Troubleshooting
