Sleep Timer - Philips FW-C100/25 User Manual

Mini audio system
Hide thumbs Also See for FW-C100/25:
Table of Contents

Advertisement

Clock/Timer
3
Press à or á on the system to set the hour
for the timer to start.
4
Press í or ë on the system to set the minute
for the timer to start.
5
Press CLOCK•TIMER to store the start time.
The timer is now set.
The
remains on the display.
TIMER
¶ At the preset time, the timer will be activated.
The selected source will be played.
Notes:
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
– If the source selected is TUNER, the last tuned
frequency will be switched on.
– If the source selected is CD, playback will begin
with the first track of the selected disc or
programme. If the disc trays are empty, the TUNER
will be selected instead.
– The timer will not activate if a recording is in
progress.
To switch off the TIMER
1
Press and hold CLOCK•TIMER for more than
2 seconds.
2
Press Ç on the system to cancel the timer.
The timer is now switched off.
The display will show "OFF" and the
disappears.
To start the TIMER again (for the same
preset time and source)
1
Press and hold CLOCK•TIMER for more than
2 seconds.
2
Press CLOCK•TIMER again to store the start
time.
The timer is now on.
The
appears on the display.
TIMER
24
pg 01-27/C100/22-Eng

Sleep Timer

This feature allows you to select a length of time
after which the system will switch to the standby
mode automatically.
1
Press SLEEP on the remote control repeatedly
to select a period of time.
The selections are as follows (time in
minutes):
15 ...
"SLEEP XX" or "OFF" will be displayed. "XX"
is the time in minutes.
2
When you reach the desired length of time, stop
pressing the SLEEP button.
The
The Sleep Timer is now set. Before the
system switches to standby mode, a countdown
of 10 seconds will be displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
While SLEEP mode is activated
¶ Press SLEEP once to view the remaining length
of time.
¶ Press SLEEP twice to change the pre-selected
period of time.
The display will show the remaining time
followed by the sequence of sleep timer options.
TIMER
To switch off the Sleep Timer
¶ Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY-ON button.
24
(only on remote control)
15 ™ 30 ™ 45 ™ 60 ™ OFF ™
display lights up.
SLEEP
3139 115 20281
12/6/00, 3:18 PM

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Fw-c100

Table of Contents