Tuning To Preset Radio Stations - Philips FW-C100/25 User Manual

Mini audio system
Hide thumbs Also See for FW-C100/25:
Table of Contents

Advertisement

Tuner
Notes:
– You can cancel the automatic programming by
pressing PROGRAM or Ç (on the system only).
– If you want to reserve a section of preset
numbers, for example preset numbers 1 to 9,
select preset 10 before starting automatic
programming, only the preset numbers 10 to 40
will be programmed.
Manual programming
1
Press TUNER (BAND).
2
Press TUNER (BAND) again to select the
desired waveband : FM, MW or LW.
3
Press PROGRAM for less than one second.
The PROG flag starts flashing.
The next available preset number will be
displayed for selection.
4
Press à or á to tune to the desired frequency.
¶ If you wish to store the radio station to another
preset number, press 4 or 3 to select the
desired preset number.
5
Press PROGRAM again.
The PROG flag disappears and the radio
station will be stored.
¶ Repeat steps 3 – 5 to store other preset radio
stations.
18
pg 01-27/C100/22-Eng
Notes:
– When 40 radio stations are stored and you
attempt to store another radio station, the display
will show "FULL". If you want to change an
existing preset number, repeat steps 3 – 5.
– You can cancel manual programming by
pressing Ç (on the system only).
– During programming, if no button is pressed
within 20 seconds, the system will exit programme
mode automatically.

Tuning to Preset Radio Stations

¶ Press 4 or 3 to select the desired preset
number.
The preset number, radio frequency, and
waveband appear on the display.
18
3139 115 20281
12/6/00, 3:18 PM

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Fw-c100

Table of Contents